What should I do if the slitting machine malfunctions? What is the correct operating procedure for the slitting machine

2026-04-22


A slitting machine is a mechanical device that cuts wide paper, mica tape, or film into multiple narrow strips of material. It is commonly used in papermaking machinery, wire and cable mica tape, and printing and packaging machinery. So, do you know how to solve the problem of a slitting machine malfunction?

How to Solve Common Faults of Slitting Machines

A slitting machine is a piece of mechanical equipment used to cut wide webs of paper, mica tape, or film into multiple narrow strips. Slitting machines are commonly used in paper machinery, mica tape for wire and cable, as well as printing and packaging machinery. Below are solutions for common faults:

Fault 1: Winding shaft tension setting

The tape tension is controlled by adjusting the nut.

Turn the nut clockwise to tighten the tape; turn it counterclockwise to loosen the tape.

Fault 2: Waste winding and adjustment

Adjust the bushing on the side material shaft to align it with the side material.

Operate manually until enough edge material has been wound onto the edge material spool to remove the shaft.

When the machine starts the slitting operation, the edge material will automatically wind up.

Fault 3: Function and adjustment of the proximity switch

The proximity switch on the machine is fixed and cannot be adjusted.

Shaft exchange sensing: one count per shaft, the counter accumulates to record the quantity of finished products.

Reverse sensing: four-point sensing with three-phase long. Counter, stable braking, and precise control.

TAG:


Related Blog


What should I do if the slitting machine malfunctions? What is the correct operating procedure for the slitting machine

A slitting machine is a mechanical device that cuts wide paper, mica tape, or film into multiple narrow strips of material. It is commonly used in papermaking machinery, wire and cable mica tape, and printing and packaging machinery. So, do you know how to solve the problem of a slitting machine malfunction?

What are the maintenance and upkeep methods for slitting machines from slitting machine manufacturers

As a slitting machine manufacturer, when maintaining and servicing our slitting machines, we first need to inspect the main components of the automatic slitting machine and add lubricating oil.

The production and development of die-cutting machines promote the development of the paper packaging industry

In transportation packaging, cardboard boxes made of corrugated paper have a trend of replacing wooden boxes; Multi layer paper bags made of paper can be used as packaging for loose bag products (cement, chemical raw materials); Composite cans made of cardboard can be used to replace metal can packaging for certain products; In sales packaging, paper bags and cardboard boxes made of paper are widely used, and the emergence of paper composite materials has expanded the application scope of paper materials in sales packaging. As for typical sales packaging containers - folding paper boxes, they are not only used for packaging drugs, food, daily necessities, and handicrafts, but also widely used for packaging beverages, washing products, cultural and educational supplies, and small hardware products.

What should be noted when operating the slitting machine?

The slitting machine is mainly used for slitting mica tape, paper, insulation materials, and thin films, and is suitable for slitting narrow strips (insulation materials, mica tape, thin films, etc.).

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT